You might have heard a lot of times to be careful when it comes to plugging in things and switching things on and off. We are sure there have been multiple times you have been scolded by your parents for touching the switches with wet fingers. 

Well, that fear will remain and get bigger when you proceed towards a career path that requires you to tackle working with electric cables on a daily basis. Along with that, there will be more safety protocols, too. 

It goes without saying that many plants these days have Cable Gland Connector in place. And why not? These help the working processes be seamless. 

That being said, irrespective of whether the project is big or small, there are some safety practices that should be in place. Here are some of the tips you need to know.

The insulation

The conductors of teh cables need to be insulated, whether the cable is a single-core or multi-core. If it is a single wire only, it can be a bare copper conductor like the one used in the earthing and lightning protection systems or will be insulated. If it is insulated, we will have outer insulation on the wire, but also, in some certain cases, we may also have an outer jacket like nylon, or it may have a sheath above the conductor’s insulation. 

Proofing

The workers have to maintain the tool so that there is no kind of risk of an explosion due to electrical malfunction. Dust may get into the machinery and might cause a lot of issues, both electrical and mechanical. The employers have to safeguard all the gear from dust-focused incidents that might lead to an explosion or electrical arc. 

The workers and employers need to monitor the tools and machinery to watch out for gaskets, loose screws, and others which can interfere with explosion and dust prevention. 

Know the surroundings

The cable and wire setup might sometimes lead you to obscure positions and locations. It may include different heights, underground areas, and even places near the water. Consider scoping out the workplace environment and identify any probable hazards first before you get started with the project. Also, the guidelines for the buildings and restrictions must be diagnosed. There are some safety precautions that might seem reasonable and obvious, while others may actually be needed. 

Wrapping Up

The electrical works require various tools. A box may get stuffed with different things. A compact and neatly packed box will assist you to finish tasks right away. All the cable gland manufacturers advise the workers to practice caution.

With that, we end our blog here. Since you have read this far, you now know the tips to be safe while working with wires.