Once you use the syringe filter, you need to dispose it. Some people reuse syringe filters. Reusing syringe filters can be dangerous due to the high risk of contamination after first use. After the first use, syringe filters become clogged with particles or bacteria, as a result, there is a possibility to inject that bacteria into another person’s body during the second use. When you use syringe filters a second time, there are high chances of filter breaking during reuse, which can cause serious injuries. 

People Are Still Confused About Whether Syringe Filter Are Reusable 

Syringe filters are nonreusable, and you can not make them in use after using them once. After using a syringe filter, it is necessary to destroy via sterilizing filters. A level of protection is needed for a filtering system and allows you multiple reuses. For the savage of money, reuse is an excellent choice. 

Filters For Syringe Filters And Nonsterile Syringes Filters

The purpose of sterile syringe filters is to sterilize the solution and autoclave them. However, cleaning with a germicidal solution to nonsterile syringe filters is a clarification sterile solution. 

What Is The Method To Sterilize Syringe Filters?

You can see various methods to sterilize syringe filters. But one of the most common ways to sterilize it is to autoclave the filters. However, it uses steam to kill bacteria and contaminants. One more method to kill bacteria and microorganisms is UV light. 

The most typical method for sterilizing syringe filters is steam sterilization. The process of the syringe filter involves the distilled water to pump repeatedly into a needle tube and then ultrasonic for approximately 20 minutes and soaking in distilled water for at least 4 hours. 

After washing the membrane over ten times, wash distilled water twice. The membrane is installed under high pressure, dried, or washed again after being repeatedly washed ten times. The syringe filter cap should be soaked in acid, boiled for 20 minutes, or soaked in NaOH for 6-12 hours before use. 

It is good to soak it in distilled water for three hours or overnight with an autoclavable syringe filter. Moisten the syringe filters and stick them onto the membrane with double steam water after they have dried. 

Extract the syringe from the pot and allow it to cool completely after the timer has stopped. Pull the bottom and top of the syringe and unscrew the caps and place them in water after it unscrews. 

Clean the pieces and make sure to rinse and dry them. 

Again assemble the syringe. For the people, antibiotic resistance is a growing concern among people as they look into non-antibiotic sterilization options. 

It Is Possible To Sterilize Syringe Filters, But You Cannot Reuse Them

You can sterilize a solvent-resistant polypropylene housing syringe filter at 125 degrees Celsius for 15 minutes. The primary purpose of a syringe filter is to remove particles from a liquid sample. However, depending on whether you use the sample, you may need a sterile or non-sterile filter. Fine particulates that cannot see with the naked eye can compromise your results, so do not reuse them.

Does It Need To Be Sterile For Syringe Filters?

If you are going to use a sterile application, syringe filters should be sterile. The best way to remove the bacteria completely is filtration. However, filtration is the most expensive and time-consuming of sterility preservation. Filtration can take a 100% guarantee of sterility. Filtration is the only sterilization method that consistently kills all types of bacteria in addition to removing bacteria. 

Make Sure Your Syringe Filters Are Sterilized For The Best Results

A syringe filter removes particulates from liquid samples, but it is essential to choose a sterile or nonsterile filter depending on the application. 

A sterile syringe filter sterilizes and clarifies sterile solutions without using sterile needles. Using polypropylene housing syringe filters for sterilizing we can perform the membranes process in an autoclave at 125 degrees Celcius for 15 minutes. 

Final Words

After reading this post, you will have a great knowledge of syringe filters and will know about the question of the reuse of syringe filters in your mind. People who are reading this post will clear their doubts about reusing the syringe filters. If you want to produce sterile syringe filters of good quality on a low budget, Simsii can help you. Therefore Simsii is a company that has specialization in creating and producing high-end disposable syringe filters. This company uses medical-grade virgin polypropylene welded housing with high-quality membranes. Thus you can trust their syringe filters will never leak sample solvent. 

News