The speed of your internet was fast earlier but now it is too slow. No worries it is a common issue that you can face often. But, we will be solving your issue fast with the below-given tips as the resolving points. Use every point appropriately to get a significant improvement in the network.

Discard Extra Connections 

It might be because the internet connection has multiple users which is why the bandwidth is making you compromise with the speed. Maybe the bandwidth of the WiFi as every device is using its bandwidth from a single connection.  

Try reducing the internet load, by pausing the downloads and disconnecting the devices which are not in use now. This can suddenly improve your WiFi speed. Technology can ensure equal bandwidth to all devices, but if you are facing an issue with the router, your internet speed must be inconsistent.

Run A Speed Test

Your ISP must be having some problem, Or the WiFi router having a connection slowdown. You can recognize the actual culprit just by doing a speed test on the internet. We recommend you perform a test on a laptop or a PC or connect a LAN cable to your router. Compare the result of the test with your respective internet plan. 

If the speed is lower than the internet plan then you have to have a word with the service provider, if not then you need to ask the ISP to resolve the issue. There could be some problem with the WiFi router if the internet is running slow on the LAN. So, try the below-mentioned tips.

Place Router At Centric Location

Placing the router in the wrong places can cause more problems. Also, placing the router in the corners can affect the extender’s range. It can break the signals at the edges.

Mostly the idle place of a router is in the middle of the house. So that the signal can travel throughout the whole house. It is hard for you to penetrate the signals through the thick walls of your homes. So keep this in mind for next time while placing or installing the WIFI router. To widen the router coverage make sure to place the router away from the electronic and metal devices.  Even though the almirahs of aluminum can affect the signals. 

You can use the WiFi strength meter to analyze the gauge and the WiFi signal strength. You can check the levels of the signals and place the router according to the wireless network coverage. But you can do it after placing the WiFi router in the middle of your home.

Install A Linksys WiFi Extender

The router needs more time to extend the network throughout the house, it is not the fault of the big rooms or big house; it’s that one router is not enough. You need an extender too to make the signals more efficient. So, choose the extender according to your internet needs and set it up through the setup portal after http //extender.linksys.com. It will surely help and work to expand the existing router’s signals and amplify them widely. 

Scan For Malware

Your computer might be affected by many reasons but it has no relation with the hardware or the ISP. If your computer is constantly facing malware, such as nuisance ware, it might be possible that the program is also facing adverse effects on overall performance by taking up memory reserves. 

An antivirus scan needs to be run. On the unwanted suspicious behavior of the device. So look for included unwanted pop-up ads in high numbers. As a result, changes to default your search engine, and redirects to unusual websites.

Install the Latest Firmware Version to The Extender

Monitor the network on the management page after doing the Linksys extender login process. Doing so will enable your extender to avoid technical bugs and it will start working optimally. For more information read and follow-up steps given below. 

How to Update Linksys Extender Firmware? 

• See the administration option on the management page.
• In addition, see the latest file of the extender firmware.
• Now download and save that new file on your networked laptop.
• After a while a window will pop up once your laptop downloads the file.
• In addition, you will start updating the device. It will reboot and this might take up to two minutes.
• Use the screen directions to complete the updating process in the right sequence. 
• You can conjointly undergo a manual provided by the official website for higher results.
• Search for the LinksysExtender model accordingly.

Now, you will succeed in extending the existing internet signals by installing the Linksys extender. But, if you seek more help you must get in touch with our Linksys team of experts. We will provide you with the more relevant solutions for your network. https://www.hituponviews.com/