The newest innovation in the car surface protection industry has taken excellence in technology, giving excellent paintwork to automobiles with more extended protection. If you look into the traditional approaches of painting sealants or car waxes, nano ceramic coating generally provides a trustable and greater level of protection for the car’s paint. It is an amazing alternative for people bored of using the same old car waxes and sealants.

Compared to conventional car waxes and sealants, which last up to 3 months, nano ceramic coating lasts up to several years if managed properly. However, after some years, it also requires reapplication to protect the car’s paint, and you can do this by yourself at home.

In this blog, you will learn how to apply nano ceramic coating at home its advantages, tips for managing it and significant differences between ceramic coating and nano ceramic coating.

What is Nano Ceramic Coating?

Nano Ceramic coating is a kind of protection coating that is applied on to the surface of the car. This coating is made up of little particles of ceramic that gives a long-lasting barrier for repelling oil, water and dirt. It can be got in both liquid and solid form that gives characteristic that are appreciative.

6 Easy Steps of How to Apply Nano Coating at Your Home

Here are the simple steps that you can follow to get a professionally done ceramic-coated car at your home as follows:

Step 1 – Properly Clean Up Your Car Paint

Initially, you must clean your car paint properly, as it quickly picks up dirt, road grime, and sand particles. These fragments can further damage the process of creating a new ceramic coating. You should use high-quality foam Canon to clean your vehicle and get the best result.

Have two buckets, one for washing your car and the other for cleaning it. Remember to start washing your car from the top and then move towards the bottom, as the lower panel is much dirtier.

Step 2 – Do Chemical Decontamination 

Use good bug, tar remover, and iron filing product base products to remove damaging iron deposits. Iron-filling products tend to change colour, so you get to know that they have correctly washed the car. Use a clay bar and a clay bar lubricant to prevent any contamination in your vehicle.

Step 3 – Use Polishing 

Before applying a new layer of nano ceramic coating to your car, you must ensure its paintwork is smooth, clean, perfect, and precise. The nano ceramic coating forms a firm bond with the vehicle’s surface and encloses contaminants.

This will affect your car’s coating and paintwork. To prevent scratches or swirls, go with a pa polishing finish. This polishing will give your vehicle a fantastic shine. To remove all marks, use machine compound polishing.

Step 4 – Use IPA Spray Wipe

To remove any residual polishing oils, spray an isopropyl alcohol mix onto your car’s surface and clean it with a high-quality towel. This step will help ensure an ultimate bond between the car’s paintwork and ceramic coating.

Step 5 – Apply Nano Ceramic Coating 

Pick a foam block and wrap the applicator around it. Before you apply the nano ceramic coating, shake the bottle correctly, draw a line of nano ceramic coating on the applicator, and work on sections two by two.

Always apply the coating in left-to-right and up-to-down motions. Allow the coating to dry for about 25 to 30 seconds. The ceramic coating product will flash if you leave it for too long.

Then you need to remove it using a high-quality microfiber towel and don’t use it again for your car as the SiO2 gets soaked up and dries up, which can damage the car’s paint.

Step 6 – Give Curing Time

After applying the nano ceramic coating, place your car in a calm, dry environment for 13-15 hours. Keep your vehicle from rain, humidity, dust, and moisture, and ensure it is not in contact with water.

However, if the weather is not too dusty or humid, you can park your vehicle outside in the sun. This will increase the car’s curing time and aid ceramic coating for car to form a firm bond with the car’s surface.

Some Advice for Taking Care of Nano Ceramic Coating

`The following advice will help you keep your car’s nano-ceramic coating in good condition:

1.) Avoid washing your car in the sun. Smears and streaks may result from the coating drying too quickly due to the heat.

2.) Avoid using harsh chemicals or abrasives when cleaning the car and instead use a gentle shampoo.

3.) To avoid scratching the coating, dry your automobile with a soft towel.

4.) Wax your car every few months to preserve the covering and maintain its gleam.

5.) Applying a nano-ceramic coating kit might help you touch areas where the coating is flaking off.

Conclusion If you consider applying nano ceramic coating at home, follow our guiding steps. First, prepare your car surface. Then, the coating is applied carefully in small sections using a specified applicator pad. Finally, give it a proper curing time in a dust-free, clean environment. The best result needs complete attention to detail, high-quality products, and years of practice.

FAQS

Q1. Is it possible to apply the ceramic coating by myself?

A1. Yes, you can apply the ceramic coating yourself. However, you should take precautions, such as wearing protective gloves, an eye protector, and a breathing respirator, especially indoors.

Q2. What is the duration of applying nano ceramic coating?

A2. The ceramic coating application process usually takes 2-3 days. The preparation stage takes 1-2 days to complete, as the coating only takes a few hours to apply. 

Q3. How many coats of ceramic coating are needed?

A3. Applying it properly to the car’s paint can gain complete coverage by applying just two coats.

Q4. How many drops of the ceramic coating are required?

A4. Six to ten drops are required throughout the cloth’s surface. Remember to shake the bottle properly before pouring the drops onto the cloth.

Q5. What would be the result if I put an excessive amount of ceramic coating?

A5. Yes, you can put an excessive amount of ceramic coating, but these further layers would be a total waste as after a certain coating layer is enough to protect the car.