One of the aspects of driving safely is to maintain the correct air pressure in your car tyres. If your tyre pressure is uninflated, you need to fill more air in them to avoid poor fuel efficiency and poor handling. If you planning to get yourself Michelin tyres then you can reach us. We offer the best tyres in Birmingham at reasonable prices.

How Much Air to Fill in Tyres?

Car tyres are designed to hold a specific amount of air pressure. For example, most car tyres can inflated between 32 to 35 pounds PSI (per square inch). But, this figure may vary based on the type of car you drive and tyre types.

You can find your car’s recommended tyres on the driver-side door, dashboard gloves, and the car manual. If you are planning to change your car’s stock or original tyres then check on the sidewall of the tyres in Birmingham to know the correct size and the tyre type. This information will you to avoid fitting incorrect tyres in your car.

You will get almost all the information in the tyre’s sidewall including the type of tyre, width of the tyre, diameter, load index and much more. Maintain the correct air pressure and don’t inflate more than the maximum limit otherwise, it can blow out.

How to Fill Air in Tyres at a Petrol Station?

Most modern cars have a tyre pressure monitoring system (TPMS) and when it lights up while driving you don’t want to wait for next. Instead, you need to reach the nearest petrol station to fill the air on your tyres.

You can follow these simple steps to fill the air in your car tyres:

• Unscrew the valve cap from your tyres and put it in a safe place so you don’t lose it.
• Attach the chuck to the valve. The tyre chuck connects the steam or hose of a tyre gauge to help the air flow freely.
• Press on the tip as it attaches to the valve stem. You will hear air filling in the tyre.
• You can check the air pressure with a gauge and continue filling the air until it reaches its recommended pressure.
• Screw the valve cap back on.
• Follow the same process to fill the air in other tyres.

Ensure you don’t overinflate the tyre but by mistake, you overfill the air, you can release some air using your fingernail or using a pin tip. Push gently on the metal part inside the valve centre, you will hear air releasing from the tyre.

Before you get back on the road, ensure you visually check the tyres. Some of the parts you should check are the tread and sidewall of the tyres. Inspect if there are any nails or external objects lodged into the rubber.

Check for bulges and cuts on the sidewall of the tyres. If you notice some issues with the tyres then reach out to a professional tyre fitter as soon as possible.

How to Fill Air in Tyres With a Compressor?

You can fill the air on your tyres by yourself when the tyres are cool. But whether you use an air compressor with a tyre chuck or portable tyre inflator, the process of filling the air in the tyres are same as at the petrol station.

1. Unscrew the valve cap of the tyre. Put it in a safe place so that you don’t lose it.
2. Attach the nozzle of your inflator or compressor to the value.
3. Use a tyre chuck to connect the compressor to the valve stem. In the case of an inflator, you don’t need the tyre chuck.
4. Press on the tip as it attaches to the valve stem. You will hear air filling in the tyre.
5. You can check the air pressure with a gauge and continue filling the air until it reaches its recommended pressure.
6. Screw the valve cap back on.
7. Follow the same process to fill the air in other tyres.

Again you don’t need to overinflate the tyre but by mistake, you overfill the air, you can release some air using your fingernail or using a pin tip. Push gently on the metal part inside the valve centre, you will hear air releasing from the tyre. Before you get back on the road, ensure you visually check the tyres.

How to Fill Air in a Spare Tyre?

Don’t forget they have stored a spare tyre in your car. It can be a lifesaver especially if your tyre gets punched in the middle of nowhere.

Follow these steps to fill the air in your spare tyres:

1. Remove the spare tyre from your car. Most cars have spare tyres in the truck but some cars have spare tyres under the car.
2. Unscrew the valve cap of the tyre and put it in a safe place so you don’t lose it.
3. Attach the chuck to the valve. The tyre chuck connects the steam or hose of a tyre gauge to help the air flow freely.
4. Press on the tip as it attaches to the valve stem. You will hear air filling in the tyre.
5. You can check the air pressure with a gauge and continue filling the air until it reaches its recommended pressure.
6. Screw the valve cap back on.

Check the spare tyre air pressure whenever you check the others in your car.

Conclusion 

When feel the air is low on your car tyres, ensure you check the tyre pressure using a gauge that shows the accurate numbers. Driving on tyres with the wrong tyre pressure can result in tread and sidewall damage, uneven wear and reduced fuel efficiency. If you are looking for Michelin tyres in Birmingham we can contact us. We have the best quality tyres at affordable prices.

Must read: How Summer Tyres Have Become So Popular?